Click on images for larger view

Duty Belt Hanger for Locker Doors. This duty belt hanger can be attached to the inside vent of any standard locker door. The short end of the device with the hole slides down through the vent louver.

Duty belts with metal hook connections attach to the clip by sliding the hooks underneath the device until they latch into place. The duty belt can then be removed by grasping the sides of the clip, lifting it off of the locker slightly, pushing up on the belt until the hooks disengage, and then sliding the belt down.

Duty belts with plastic buckles attach to the two lower hooks of the clip by using the female end of the belt buckle. The buckle slides on and rests on both hooks. Simply lift the belt up to remove it from the clip. The product is rugged and easily supports a fully-laden duty belt with holster and all the gear.

Your dress belt and/or keys can be secured on the top single hook. The exterior hole can be used to hang a standard metal hanger with your uniform, fresh dry-cleaning, a towel or anything else.

Features:

• No more twisted wire hangers
• No more duty belt on the bottom of your locker
• Durable and supports duty belts loaded with lots of accessories
• Supports up to 70lbs
• Accomodates both metal-style belt buckles and polymer buckles
• 3" wide x 5" high